Search results for 'asi'
Items 11 to 14 of 14 total |
Page:
|
Show per page |
View as: Grid List | Sort by |
AUX-1
Excl. Tax:
$ 69.95
Incl. Tax:
$ 74.15
The AUX-1 is a microprocessor powered Auxiliary Input controller that simplifies adding an audio input to original radios. It has three triggers that can be used independently or in any combination to switch the radio over from normal operation to the auxiliary input. The three triggers are a VOX, power cycling and a switch input. The VOX circuitry and algorithms are based on the superior VOX implementation of the FMR-1 radios. It is extremely sensitive and extremely good at rejecting noise. This results in no switching back to the radio during quiet audio passages.
The audio output level from the AUX-1 is very high to match the levels of early tube radios. Whereas directly connecting an MP3 player to the audio amplifier on some tube radios results in low volume and poor performance, the digitally controlled amplifier on the AUX-1 easily matches the levels of any radio.
Full protection against reverse battery and over power, the AUX-1 is nearly indestructible. Through cleaver design, the AUX-1 is compatible with 6V/12V positive/negative ground radios resulting in only one board being required for all installations.
As with all Aurora Design products, the VBx-1 is designed to SAE specifications and built in the USA at an ISO9001:2000 facility
Learn More
The audio output level from the AUX-1 is very high to match the levels of early tube radios. Whereas directly connecting an MP3 player to the audio amplifier on some tube radios results in low volume and poor performance, the digitally controlled amplifier on the AUX-1 easily matches the levels of any radio.
Full protection against reverse battery and over power, the AUX-1 is nearly indestructible. Through cleaver design, the AUX-1 is compatible with 6V/12V positive/negative ground radios resulting in only one board being required for all installations.
As with all Aurora Design products, the VBx-1 is designed to SAE specifications and built in the USA at an ISO9001:2000 facility
Learn More
1960 Ford Thunderbird AM/FM Stereo Radio
Excl. Tax:
$ 699.95
Incl. Tax:
$ 741.95
1960 Ford Thunderbird AM/FM Stereo Radio
NOW WITH BLUETOOTH
Specifications
Small size, BIG features!
Looks original but offers today's technology
2½" case depth allows room for air conditioning
Analog controls look and feel like the original radio
Chrome dash plate (as shown)
included
Click to see larger picture
White outer knob with chrome insert looks just like the original
Quality chrome pushbuttons and inner knobs like the original
All controls easily accessible. Volume, bass, treble, balance, fader and tuning from original-looking controls
AM dial scale in foreground looks original with FM dial scale below
LED dial lights will never need replacing
Digitally tuned AM/FM stereo front end provides stable, high quality reception
11.5-16.0 Volts DC Negative Ground only
Maximum power = 180 watts RMS (45 watts x 4 speakers 4Ω, 14.4V, 1kHz)
Do not use original speakers
Uses original antenna
10 presets (5 AM, 5 FM). Digitally tuned receiver with analog display
Dimensions: 7¾" W x 2½" H. Depth behind dash is 2¾" at shafts
Standard (Motorola) antenna jack
Memory retention (presets and other user settings) more than 40 years with power disconnected
3 RCA jacks for left channel, right channel, and sub-woofer line outs
3.5 mm phone jack for input from iPod, satellite radio or phone
Switch selectable for 1,2,3 or 4 speakers
Switch selectable for North America or Europe mode
Includes a 6 foot 3.5mm male-to-male auxiliary cable with every radio
You can add our Bluetooth adapter kit option to this radio!
THE REASON FOR THE INCREASE IN PRICING IS DUE TO THE TARIFFS. THESE RADIOS ARE MADE IN THE US BUT ALL THE SMALL COMPONENTS AND CHROME THAT ARE USED IN THESE RADIOS ARE MADE IN CHINA. THERE ARE NO MANUFACTURES IN THE US THAT MAKE THESE COMPONENTS. THE MANUFACTURE HAS HELD THE PRICING ON THE SHIPPING FOR OVER 10 YEARS EVEN THOUGH THE COST OF SHIPPING HAS GONE UP.
Learn More
NOW WITH BLUETOOTH
Specifications
Small size, BIG features!
Looks original but offers today's technology
2½" case depth allows room for air conditioning
Analog controls look and feel like the original radio
Chrome dash plate (as shown)
included
Click to see larger picture
White outer knob with chrome insert looks just like the original
Quality chrome pushbuttons and inner knobs like the original
All controls easily accessible. Volume, bass, treble, balance, fader and tuning from original-looking controls
AM dial scale in foreground looks original with FM dial scale below
LED dial lights will never need replacing
Digitally tuned AM/FM stereo front end provides stable, high quality reception
11.5-16.0 Volts DC Negative Ground only
Maximum power = 180 watts RMS (45 watts x 4 speakers 4Ω, 14.4V, 1kHz)
Do not use original speakers
Uses original antenna
10 presets (5 AM, 5 FM). Digitally tuned receiver with analog display
Dimensions: 7¾" W x 2½" H. Depth behind dash is 2¾" at shafts
Standard (Motorola) antenna jack
Memory retention (presets and other user settings) more than 40 years with power disconnected
3 RCA jacks for left channel, right channel, and sub-woofer line outs
3.5 mm phone jack for input from iPod, satellite radio or phone
Switch selectable for 1,2,3 or 4 speakers
Switch selectable for North America or Europe mode
Includes a 6 foot 3.5mm male-to-male auxiliary cable with every radio
You can add our Bluetooth adapter kit option to this radio!
THE REASON FOR THE INCREASE IN PRICING IS DUE TO THE TARIFFS. THESE RADIOS ARE MADE IN THE US BUT ALL THE SMALL COMPONENTS AND CHROME THAT ARE USED IN THESE RADIOS ARE MADE IN CHINA. THERE ARE NO MANUFACTURES IN THE US THAT MAKE THESE COMPONENTS. THE MANUFACTURE HAS HELD THE PRICING ON THE SHIPPING FOR OVER 10 YEARS EVEN THOUGH THE COST OF SHIPPING HAS GONE UP.
Learn More
1963-64 Chevrolet II, Nova AM/FM Bluetooth® 'Dream Line' Radio
Excl. Tax:
$ 799.95
Incl. Tax:
$ 847.95
1963-64 Chevrolet II, Nova AM/FM Bluetooth® 'Dream Line' Radio
More about Dream Line
Specifications
• Quality chrome plated faceplate and knobs fit like the original
• AM or FM 'roll over' dial works
• AM or FM band selected with slide bar
• 10 presets (5 AM, 5 FM)
• Maximum power = 180 watts RMS (45 watts x 4 speakers 4Ω, 14.4V, 1kHz)
•Do not use original speakers
•Uses original antenna
•Digitally tuned AM/FM stereo front end provides stable, high quality reception
•Analog controls look and feel like the original radio
•All controls easily accessible. Volume, bass, treble, balance, fader and tuning from original looking controls
•Includes dash mounting hardware (baskets) exactly like the originals
•7/16" shafts on controls for mounting (same size and thread as original shafts)
• Memory retention for user settings more than 40 years
•LED dial lights will never need replacing!
• 3 RCA jacks for left channel, right channel and sub-woofer line outs
•3.5 mm phone jack for input from iPod, satellite radio or MP3 player
•Switch selectable for 1,2,3 or 4 speakers
•Switch selectable for North America or Europe mode
•Includes a 6 foot 3.5mm male-to-male auxiliary cable with every radio
• Bluetooth 3.0 EDR compliant
• Built in microphone for HFP (hands-free profile)
• HSP, A2DP, AVRCP profiles supported
• Programmable audio equalizer
• Place/answer calls or stream your favorite programs while maintaining original appearance!
More about 3.0+EDR wireless voice/audio
Part # 442231BT
1963-64 Chevrolet II, Nova AM/FM Bluetooth® 'Dream Line' Radio
THE REASON FOR THE INCREASE IN PRICING IS DUE TO THE TARIFFS. THESE RADIOS ARE MADE IN THE US BUT ALL THE SMALL COMPONENTS AND CHROME THAT ARE USED IN THESE RADIOS ARE MADE IN CHINA. THERE ARE NO MANUFACTURES IN THE US THAT MAKE THESE COMPONENTS. THE MANUFACTURE HAS HELD THE PRICING ON THE SHIPPING FOR OVER 10 YEARS EVEN THOUGH THE COST OF SHIPPING HAS GONE UP.
Learn More
More about Dream Line
Specifications
• Quality chrome plated faceplate and knobs fit like the original
• AM or FM 'roll over' dial works
• AM or FM band selected with slide bar
• 10 presets (5 AM, 5 FM)
• Maximum power = 180 watts RMS (45 watts x 4 speakers 4Ω, 14.4V, 1kHz)
•Do not use original speakers
•Uses original antenna
•Digitally tuned AM/FM stereo front end provides stable, high quality reception
•Analog controls look and feel like the original radio
•All controls easily accessible. Volume, bass, treble, balance, fader and tuning from original looking controls
•Includes dash mounting hardware (baskets) exactly like the originals
•7/16" shafts on controls for mounting (same size and thread as original shafts)
• Memory retention for user settings more than 40 years
•LED dial lights will never need replacing!
• 3 RCA jacks for left channel, right channel and sub-woofer line outs
•3.5 mm phone jack for input from iPod, satellite radio or MP3 player
•Switch selectable for 1,2,3 or 4 speakers
•Switch selectable for North America or Europe mode
•Includes a 6 foot 3.5mm male-to-male auxiliary cable with every radio
• Bluetooth 3.0 EDR compliant
• Built in microphone for HFP (hands-free profile)
• HSP, A2DP, AVRCP profiles supported
• Programmable audio equalizer
• Place/answer calls or stream your favorite programs while maintaining original appearance!
More about 3.0+EDR wireless voice/audio
Part # 442231BT
1963-64 Chevrolet II, Nova AM/FM Bluetooth® 'Dream Line' Radio
THE REASON FOR THE INCREASE IN PRICING IS DUE TO THE TARIFFS. THESE RADIOS ARE MADE IN THE US BUT ALL THE SMALL COMPONENTS AND CHROME THAT ARE USED IN THESE RADIOS ARE MADE IN CHINA. THERE ARE NO MANUFACTURES IN THE US THAT MAKE THESE COMPONENTS. THE MANUFACTURE HAS HELD THE PRICING ON THE SHIPPING FOR OVER 10 YEARS EVEN THOUGH THE COST OF SHIPPING HAS GONE UP.
Learn More
FMR2.6: FMR-DRD1
Excl. Tax:
$ 549.00
Incl. Tax:
$ 581.94
FMR-DRD1:
After a year in development, the new
FMR-DRD1 DAB/DAB+ daughter card is
here! (Available late January) This patent
pending solution brings worldwide digital
radio support to your original radio. Just
imaging that 1950’s Radiomobile or 1960‘s
Blaupunkt radio receiving the latest digital
broadcasts. As noted, the FMR-DRD1 is
compatible with both DAB and DAB+
broadcasts.
910 Learn More
After a year in development, the new
FMR-DRD1 DAB/DAB+ daughter card is
here! (Available late January) This patent
pending solution brings worldwide digital
radio support to your original radio. Just
imaging that 1950’s Radiomobile or 1960‘s
Blaupunkt radio receiving the latest digital
broadcasts. As noted, the FMR-DRD1 is
compatible with both DAB and DAB+
broadcasts.
910 Learn More
Items 11 to 14 of 14 total |
Page:
|
Show per page |
View as: Grid List | Sort by |