MikeHaganAntiqueAutoRadio.com

Skip to Main Content »

Search Site

Select Your Currency

Shop by

Shopping Options

Category
  1. New Radios (2)
  2. Stereo Conversions (2)

Newsletter

Newsletter
 

Search results for 'Ford'

5 Item(s) Show per page
View as: Grid  List  Sort by Set Descending Direction
1954 Ford AM/FM Stereo Radio LOWER THAN EBAY
Excl. Tax: $ 699.95 Incl. Tax: $ 741.95
• Depth behind dash is 2.5” at shafts
• Dimensions: 8.75”W x 2.5” H x 2.75” D
• 11.5 – 16.0 volts DC Negative Ground Input – Can be operated on 6 volts w/power inverter
• Maximum power = 180 watts RMS (45 watts x 4 speakers Ω, 14.4v, 1kHz
• Sensitivity (FM S/N 30dB) typ 5dBµ, (AM S/N 20dB) typ 29 dBµ
• Digitally tuned receiver with analog display
• RCA jacks provided for MP3, CD player or satellite radio
• Standard (Motorola) antenna jack
• 1/2” D-shafts on controls for mounting (same size and thread as original shafts
• All controls easily accessible. Volume, Bass, Treble, Balance, Fader and Tuning from original looking controls

• Memory retention (presets, fader and band settings) more than 40 years with power disconnected

• European channel spacing optional
Radio is 12 volt negative ground
6 volts positive ground is optional at $100
THE REASON FOR THE INCREASE IN PRICING IS DUE TO THE TARIFFS. THESE RADIOS ARE MADE IN THE US BUT ALL THE SMALL COMPONENTS AND CHROME THAT ARE USED IN THESE RADIOS ARE MADE IN CHINA. THERE ARE NO MANUFACTURES IN THE US THAT MAKE THESE COMPONENTS. THE MANUFACTURE HAS HELD THE PRICING ON THE SHIPPING FOR OVER 10 YEARS EVEN THOUGH THE COST OF SHIPPING HAS GONE UP. Learn More

Add to Wishlist | Add to Compare

AURORA FMR-3.0 AM-FM STEREO CONVERSION
Excl. Tax: $ 429.00 Incl. Tax: $ 454.74
Aurora Design has once again left the competition at the starting line. While other companies offer outdated basic AM/FM operation, the FMR2.8 is the first and only solution for your original classic vehicle radio to offer worldwide digital radio support! With fully licensed HD Radio™ Technology for North America and DAB/DAB+ (utilizing Aurora Design patent pending technology) for the rest of the world, no other solution even comes close. Make sure your radio is set for the 21st century and not stuck with just basic analog AM/FM technology from 80 years ago!
Audio Equalizer is now included on all FMR-2.8 radios! This feature consists of a three band equalizer, adjustable Loudness control, adjustable Subwoofer gain and Crossover frequency. Now you can adjust the sound of your radio to perfectly match your speakers and vehicle!
Voice Assist HD is standard on all FMR-2.8 radios! The radio will speak in clear English all basic operations such as “Balance Adjust”, “Scanning for Stations”, “WXYZ FM 107.9”, “Right Front Speaker shorted to ground”, etc. This greatly eases radio operation as there is no need to memorize obtuse beep codes or blinking lights.
The Scan feature we pioneered in 2017 was so well received, our customers with manually tuned radios felt left out. No longer! Now even manually tuned radios have the same modern Scan feature as signal seeking radios. This is a great feature to have when you’re on a tour or just looking for something different to listen to.
On signal seeking radios like Wonderbar, Town&Country, ElectroTouch radios) somply press the Seek button twice and the radio will scan to the next station, pause for 8 seconds, and then scan to the next station repeatedly until the scan is stopped. On manually tuned radios, just twist the tuning control twice to the right to scan through the stations!
Tube Emulation Mode allows the FMR-2.8 to mimic the “warmup” and “cool down” of an original tube radio fooling even the most seasoned judge on that concours restoration, or just for that nostalgic feel!
LW and SW bands are now included on all FMR-2.8 radios! LW or Longwave is available for radios configured for European use while SW or ShortWave is available for radios configured for North American use. Now your factory radio with these bands can be made operational again!
The FMR-2.8 is the exciting new follow-on to the FMR-1. This new product from Aurora Design LLC opens up a new world of possibilities for early automotive radios. By replacing the electronics in an original radio with modern digital electronics, any radio can be brought up to today’s standards, performance and reliability.
Designed to meet automotive OEM and SAE performance specifications, the FMR-2.8 represents a no compromise design. All critical components are full automotive OEM grade parts, not lower cost, lower quality parts designed for aftermarket/consumer products. Every aspect of the design and operation of the FMR-2.8, no matter how insignificant was scrutinized, resulting in a product that performs beyond the expectations of even the most demanding user.
Through the use of sophisticated algorithms and a custom RealTimeOperatingSystem (RTOS), the FMR-2.8 offers unprecedented levels of features and performance. Working equally well with any original tuner (inductive, capacitive and resistive) the FMR-2.8 offers smooth and precise tuning rivaling the best analog tuners available. Installation time is significantly reduced since the FMR-2.8 easily adapts to just about any radio configuration from the 1930’s thru the 1980’s.
Imagine, complicated and time consuming modifications to the tuners used on the Hudson/Nash
Ramblers and Metropolitans, 1930’s Philco-Ford or 1940’s Zenith-Ford radios is a thing of the past!
Even the complicated Rotomatic tuner used on the 1940 Zenith-Ford radio that switches between a variable capacitor for manual tuning and variable inductors for preset tuning is handled without any modifications by the FMR-2.8!
The automotive grade receiver is extremely robust and offers such features as noise blankers which help eliminate ignition and generator/alternator noise and an automatic bandwidth filter that continuously adjusts from narrow to wide for optimum performance in all situations.
The digitally controlled power amplifier provides up to 4 X 45W of output power into 4 ohm speakers and 2 X 75W into 2 ohm speakers and is fully protected against over-voltages, shorts between lines as well as to ground or power. It is controlled by the onboard microprocessor and intelligently monitors the speaker connections and makes decisions such as enabling or disabling the balance and fader controls based on these readings. It uses a unique Class SB topology similar to standard Class AB while using only 1/3 the power at normal listening levels resulting in less heat being generated.
Five line level outputs, four for front/rear channels and one for subwoofer, allow the FMR-2.8 to drive out-board amps for those who wish to add even more audio power.
Stereo auxiliary inputs with floating ground to reduce or eliminate ground loop noise are provided for adding other audio sources such as iPod’s®, MP3 players, CD players, satellite radios, etc.
Signal Seeking radios like the GM/Delco® Wonderbar®, Ford® Town & Country® and Chrysler® Electro-Touch® radios are fully supported including features like sensitivity controls (Town & Country). By combining the unsurpassed performance of the FMR-2.8‘s AM/FM receiver with its high performance microprocessor, it finds the stations every time.
Under the skin, the FMR-2.8 was designed to be as robust as the operating features it offers. Meeting industry performance specification like SAE J1113-42, the FMR-2.8 cannot be damaged by battery reversal, double battery jump starts, alternator disconnects (load dump), etc. Even if a careless mechanic accidentally connects the battery up backwards, the FMR-2.8 is completely protected.
Aurora Design automotive products are built in a 33,000 sq. ft., ISO 9001:2000 facility located in the USA. With a capacity to place 1,800,000 components per day, 2D and 3D X-Ray inspection and full traceability back to the component level, the highest quality assemblies are assured.

Add $100 for Wonderbar radios.
Add $150 for 6 volt or positive ground cars.
Add $150 Foreign 1960 and newer
Add $200 for Foreign pre 1959
Add $200 for pre-war cars.
Add $200 for 1956-57 Lincoln & Mercury Town & Country Radios.
Add $200 for between pre-1950 to prewar
These prices are for a stereo conversion not for selling the board. All boards must be installed by a authorized service rep.
254 Learn More

Add to Wishlist | Add to Compare

FMC-2 FM TUNER
Excl. Tax: $ 179.00 Incl. Tax: $ 189.74
The FMC-2 uses advanced digital electronics and sophisticated software algorithms to completely replicated the user experience of an original analog automotive FM radio. With perfect quartz locked accuracy and an operational feel that is smooth and precise, no one will ever know that your original AM radio can now receive FM broadcasts and be used with an MP3 player, satellite radio or similar device.
THE PRICE OF $170 IS IN ADDITION TO THE REBUILDING COST OF THE RADIO.


Learn More

Add to Wishlist | Add to Compare

1960 Ford Thunderbird AM/FM Stereo Radio
Excl. Tax: $ 699.95 Incl. Tax: $ 741.95
1960 Ford Thunderbird AM/FM Stereo Radio
NOW WITH BLUETOOTH
Specifications

Small size, BIG features!

Looks original but offers today's technology

2½" case depth allows room for air conditioning

Analog controls look and feel like the original radio

Chrome dash plate (as shown)
included


Click to see larger picture

White outer knob with chrome insert looks just like the original

Quality chrome pushbuttons and inner knobs like the original

All controls easily accessible. Volume, bass, treble, balance, fader and tuning from original-looking controls

AM dial scale in foreground looks original with FM dial scale below

LED dial lights will never need replacing

Digitally tuned AM/FM stereo front end provides stable, high quality reception

11.5-16.0 Volts DC Negative Ground only

Maximum power = 180 watts RMS (45 watts x 4 speakers 4Ω, 14.4V, 1kHz)

Do not use original speakers

Uses original antenna

10 presets (5 AM, 5 FM). Digitally tuned receiver with analog display

Dimensions: 7¾" W x 2½" H. Depth behind dash is 2¾" at shafts

Standard (Motorola) antenna jack

Memory retention (presets and other user settings) more than 40 years with power disconnected

3 RCA jacks for left channel, right channel, and sub-woofer line outs

3.5 mm phone jack for input from iPod, satellite radio or phone

Switch selectable for 1,2,3 or 4 speakers

Switch selectable for North America or Europe mode

Includes a 6 foot 3.5mm male-to-male auxiliary cable with every radio

You can add our Bluetooth adapter kit option to this radio!
THE REASON FOR THE INCREASE IN PRICING IS DUE TO THE TARIFFS. THESE RADIOS ARE MADE IN THE US BUT ALL THE SMALL COMPONENTS AND CHROME THAT ARE USED IN THESE RADIOS ARE MADE IN CHINA. THERE ARE NO MANUFACTURES IN THE US THAT MAKE THESE COMPONENTS. THE MANUFACTURE HAS HELD THE PRICING ON THE SHIPPING FOR OVER 10 YEARS EVEN THOUGH THE COST OF SHIPPING HAS GONE UP.

Learn More

Add to Wishlist | Add to Compare

Ford Logo Radio Screen Protectors
Excl. Tax: $ 24.99 Incl. Tax: $ 26.49
•Licensed by Ford Motor Co.
•Authentic Ford logo
•Vintage-look radio dial for added authenticity
•Apply without adhesive - simple to apply and easy to remove
•Per package of three screen protectors
•Made to fit Laguna, Hermosa, or Long Beach radios
VINTAGE FORD LOGO
LATE FORD LOGO
867 Learn More

Add to Wishlist | Add to Compare

5 Item(s) Show per page
View as: Grid  List  Sort by Set Descending Direction
 

My Cart

You have no items in your shopping cart.

Compare Products