Search results for 'radio'
| 3 Item(s) | Show per page |
| View as: Grid List |
Sort by
|
Universal IPOD audio interface for AUX ADAPTERS
Excl. Tax:
$ 39.95
Incl. Tax:
$ 42.35
Universal IPOD audio interface for AUX ADAPTERS. Can also be used in cars with AUX inputs or aftermarket/factory radios with AUX inputs. CHARGES ipod and allows a ONE PLUG simplified connection when entering your vehicle.
Also not shown in picture cable includes a stereo mine plug Learn More
Also not shown in picture cable includes a stereo mine plug Learn More
HPA1 Amplified Hide-away Antenna
Excl. Tax:
$ 29.95
Incl. Tax:
$ 31.75
The new RetroAntenna™ HPA1 amplified hide-away antenna from RetroSound® allows you to get great AM/FM reception without having to use standard fender-mount or window antennas. The HPA1 installs in seconds, using a standard Motorola antenna plug and your radio’s power antenna wire, and can be installed almost anywhere in your vehicle thanks to the supplied 105-inch antenna cable and power lead. Never worry again about a stolen or damaged fender-mount or roof-mount antenna. This antenna uses active magnetic field circuitry for enhanced radio reception. (Note: This antenna is designed for mounting inside a vehicle, and is not weather or heat resistant)
-- High gain AM/FM Hide-away antenna
-- Hide it behind your dash for a clean, unobtrusive installation
-- Installs in seconds, using a standard Motorola antenna plug and your radio’s power antenna lead
-- Active magnetic field circuitry
-- 105-inch cable to install antenna virtually anywhere in your vehicle.
-- No more worries about a broken or stolen antenna
-- Antenna dimensions (box only) : 4"W x 1" H x 1" D Learn More
-- High gain AM/FM Hide-away antenna
-- Hide it behind your dash for a clean, unobtrusive installation
-- Installs in seconds, using a standard Motorola antenna plug and your radio’s power antenna lead
-- Active magnetic field circuitry
-- 105-inch cable to install antenna virtually anywhere in your vehicle.
-- No more worries about a broken or stolen antenna
-- Antenna dimensions (box only) : 4"W x 1" H x 1" D Learn More
Bluetooth Adapter Kit
Excl. Tax:
$ 39.95
Incl. Tax:
$ 42.35
INSTALLATION
Install videos located toward the bottom of this page
Your adapter kit includes an 18" extension cable with a threaded panel mount jack. The jack can be installed in sheet metal up to .093" (13 GA) thick. Drill a 1/4" hole in the desired position. It should be placed near the radio and the cigarette lighter, on the underside of the dash where it is out of sight but easy to reach and will not interfere with the driver's legs. Plug the other end of the extension cable into the AUX input jack on the back of the radio. Note: Your dash may have a stiffener welded to the underside of the dash which will exceed the .093" max thickness.
* Insert the 3.5 mm plug from the Bluetooth® adapter into the 3.5 mm jack.
* Plug the Bluetooth® adapter into the 12-volt cigarette lighter socket.
* Turn the radio on. See your radio instructions for how to enable the AUX input (varies with model).
PAIR YOUR DEVICE
* Press and hold the center (Play/Pause/Answer) button until the left and right buttons start flashing.
* Go to the Bluetooth settings on your phone, make sure Bluetooth is enabled.
* Some phones will require you to search for new connections.
* Select BC10 AUDIO from the list of accessories.
* When paired successfully, the left and right buttons will become solid blue.
* Some phones will ask if you want to connect. Select 'Yes'.
Note: Only one device can be paired at any time. To pair a different phone, repeat the pairing instructions above for each device.
Hands-free phone calls: If the radio is on and in the aux mode, your phone will connect automatically. When an incoming call is detected, press the center button. The call will be answered and routed through your radio speaker(s). To hang up, press the center button again.
Managing music: You can play your own music selections or streaming audio the same way you would on your headphones. Press the center (Play/Pause/Answer) button and your radio will play whatever is selected on your phone. Press the left or right buttons to repeat a selection or skip to the next song (may not work with all phones). Press the center (Play/Pause/Answer) to pause, press it again to un-pause. If a call comes in while listening to music, the music will automatically pause.
BE SAFE: Make sure you are familiar with these operations before you go out on the road. Texting while driving is dangerous and illegal in many states. Driving demands your full attention. Remember: not all drivers have hands-free phones, so the guy next to you may be driving while distracted. Learn More
Install videos located toward the bottom of this page
Your adapter kit includes an 18" extension cable with a threaded panel mount jack. The jack can be installed in sheet metal up to .093" (13 GA) thick. Drill a 1/4" hole in the desired position. It should be placed near the radio and the cigarette lighter, on the underside of the dash where it is out of sight but easy to reach and will not interfere with the driver's legs. Plug the other end of the extension cable into the AUX input jack on the back of the radio. Note: Your dash may have a stiffener welded to the underside of the dash which will exceed the .093" max thickness.
* Insert the 3.5 mm plug from the Bluetooth® adapter into the 3.5 mm jack.
* Plug the Bluetooth® adapter into the 12-volt cigarette lighter socket.
* Turn the radio on. See your radio instructions for how to enable the AUX input (varies with model).
PAIR YOUR DEVICE
* Press and hold the center (Play/Pause/Answer) button until the left and right buttons start flashing.
* Go to the Bluetooth settings on your phone, make sure Bluetooth is enabled.
* Some phones will require you to search for new connections.
* Select BC10 AUDIO from the list of accessories.
* When paired successfully, the left and right buttons will become solid blue.
* Some phones will ask if you want to connect. Select 'Yes'.
Note: Only one device can be paired at any time. To pair a different phone, repeat the pairing instructions above for each device.
Hands-free phone calls: If the radio is on and in the aux mode, your phone will connect automatically. When an incoming call is detected, press the center button. The call will be answered and routed through your radio speaker(s). To hang up, press the center button again.
Managing music: You can play your own music selections or streaming audio the same way you would on your headphones. Press the center (Play/Pause/Answer) button and your radio will play whatever is selected on your phone. Press the left or right buttons to repeat a selection or skip to the next song (may not work with all phones). Press the center (Play/Pause/Answer) to pause, press it again to un-pause. If a call comes in while listening to music, the music will automatically pause.
BE SAFE: Make sure you are familiar with these operations before you go out on the road. Texting while driving is dangerous and illegal in many states. Driving demands your full attention. Remember: not all drivers have hands-free phones, so the guy next to you may be driving while distracted. Learn More
| 3 Item(s) | Show per page |
| View as: Grid List |
Sort by
|
