• Depth behind dash is 2.5” at shafts
• Dimensions: 8.75”W x 2.5” H x 2.75” D
• 11.5 – 16.0 volts DC Negative Ground Input – Can be operated on 6 volts w/power inverter
• Maximum power = 180 watts RMS (45 watts x 4 speakers Ω, 14.4v, 1kHz
• Sensitivity (FM S/N 30dB) typ 5dBµ, (AM S/N 20dB) typ 29 dBµ
• Digitally tuned receiver with analog display
• RCA jacks provided for MP3, CD player or satellite radio
• Standard (Motorola) antenna jack
• 1/2” D-shafts on controls for mounting (same size and thread as original shafts
• All controls easily accessible. Volume, Bass, Treble, Balance, Fader and Tuning from original looking controls

• Memory retention (presets, fader and band settings) more than 40 years with power disconnected

• European channel spacing optional
Radio is 12 volt negative ground
6 volts positive ground is optional at $100
THE REASON FOR THE INCREASE IN PRICING IS DUE TO THE TARIFFS. THESE RADIOS ARE MADE IN THE US BUT ALL THE SMALL COMPONENTS AND CHROME THAT ARE USED IN THESE RADIOS ARE MADE IN CHINA. THERE ARE NO MANUFACTURES IN THE US THAT MAKE THESE COMPONENTS. THE MANUFACTURE HAS HELD THE PRICING ON THE SHIPPING FOR OVER 10 YEARS EVEN THOUGH THE COST OF SHIPPING HAS GONE UP. Learn More

• Fits dash without any modifications
• Quality chrome plated knobs exactly match the original
• 4 × 45 watts RMS output allows up to 180 watts of audio power
• AM or FM band selected with push buttons like the original
• Roll over dial looks and works like original
• 8 presets (4 AM, 4 FM). Digitally tuned receiver with analog display
• Digitally tuned AM/FM stereo front end provides stable, high quality reception
• Analog controls look and feel like the original radio
• All controls easily accessible. Volume, Bass, Treble, Balance, Fader and Tuning from
original-looking controls
• RCA jacks provided for MP3, CD player or satellite radio
• Red stereo indicator – dial face lights blue
• 7/16"shafts on controls for mounting (same size and thread as original shafts)
• European channel spacing optional
THE REASON FOR THE INCREASE IN PRICING IS DUE TO THE TARIFFS. THESE RADIOS ARE MADE IN THE US BUT ALL THE SMALL COMPONENTS AND CHROME THAT ARE USED IN THESE RADIOS ARE MADE IN CHINA. THERE ARE NO MANUFACTURES IN THE US THAT MAKE THESE COMPONENTS. THE MANUFACTURE HAS HELD THE PRICING ON THE SHIPPING FOR OVER 10 YEARS EVEN THOUGH THE COST OF SHIPPING HAS GONE UP. Learn More

AURORA STEREO SYSTEM
• Converted to AM-FM Stereo
• 180 Watts RMS
• 45 Watts RMS per speaker X four
• Inputs for XM, Sirius, CD, IPOD or MP3
• Available with one, two or four speakers
• European band available
Learn More

• MODEL 25BR-1542A
• VINTAGE PLASTIC 1953
• LOWER FRONT SLIDE RULE DIAL
• UPPER LATTICE GRILL
• VOLUME, TONE, TUNING KNOB
• PHONE INPUT
Learn More

• 1947 PLASTIC TABLE RADIO
• UPPER SLANTED SLIDE RULE DIAL
• LOWER HORIZ GRILL BARS
• 2 KNOBS BROADCAST BAND
SOME SMALL CHIPS IN CASE Learn More

• 1953 PLASTIC PORTABLE RADIO
• UPPER SLIDE RULE DIAL
• LOWER HORIZ BARS
• HANDLE & SIDE KNOBS
• AC/DC/BAT
MODEL 2BX63 Learn More

• 1948 MAROON PLASTIC
• ROUND DIAL ON CASE TOP
• HORIZ LOUVERS
• RIGHT SIDE KNOB
• HUMS NEEDS RECAPED
Learn More

• Converted to AM-FM Stereo
• 180 Watts RMS
• 45 Watts RMS per speaker X four
• Rechromed face and new knobs
• Inputs for XM, Sirius, CD, IPOD or MP3
• Available with one, two or four speakers
• European band available
118 Learn More

• Fits in dash without any modifications
• Quality Chrome plated faceplate and knobs exactly match the original
• 4 x 45 watts RMS output allows up to 180 watts of audio power
• AM or FM "roll over" dial looks and works like the original
• AM or FM band selected with slide bar like the original
• 10 presets (5 AM, 5 FM)
• Digitally tuned AM/FM stereo front end provides stable, high quality reception
• RCA jacks provided for MP3, CD player or satellite radio
• Analog controls look and feel like the original radio
• All controls easily accesible. Volume, Bass, Treble, Balance, Fader and Tuning from original-looking controls
• Convector and/or Multiplexer not needed
• 7/16" shafts on controls for mounting (same size and thread as original shafts)
• Memory retention for user settings more that 40 years
• LED dial light never need replacing
• European channel spacing available
THE REASON FOR THE INCREASE IN PRICING IS DUE TO THE TARIFFS. THESE RADIOS ARE MADE IN THE US BUT ALL THE SMALL COMPONENTS AND CHROME THAT ARE USED IN THESE RADIOS ARE MADE IN CHINA. THERE ARE NO MANUFACTURES IN THE US THAT MAKE THESE COMPONENTS. THE MANUFACTURE HAS HELD THE PRICING ON THE SHIPPING FOR OVER 10 YEARS EVEN THOUGH THE COST OF SHIPPING HAS GONE UP.
Learn More